| be graphical only, not requiring detailed computations or field work above that required to obtain the above information.
4. Plans of proposed utility layouts (sewer lines, water lines, storm drainage, etc.) showing feasible connection to existing and proposed utility systems, plan for electric lighting; and the location and number of garbage receptacles.
5. When deemed necessary by the Planning Board, profiles of all proposed streets showing natural and finished grades drawn to scale of not less than one (1) inch equals forty (40) feet horizontal and one (1) inch equals four (4) feet vertical.
|
| (b) |
After the preliminary plan has been approved by the Planning Board, two (2) copies of the final plan shall be submitted to the Town Commissioners for final approval. The final plan shall be prepared on Mylar and shall contain the preliminary plan as approved. If desired by the applicant, it may constitute only that portion of the approved preliminary plan, which he proposes to develop at the time; provided, however, that such portion conforms to the minimum requirements of this Section. The final plan shall be drawn in black ink upon mylar sheets either fifteen (15) inches by twenty-one (21) inches or twenty (20) inches by twenty-four (24) inches in size, to a scale of not less than one (1) inch equals one-hundred (100) feet. It shall contain the following:
1. A site plan for the manufactured home park.
2. The name of the manufactured home park, the names and addresses of the owner( s) and the designer of the park.
3. Date, approximate north arrow and scale.
4. The boundary lines of the tract with accurate bearings and angular ( dimensions) drawn to scale.
5. The names, locations and dimensions of proposed streets, alleys.
6. Driveways, entrances, exits, walkways, easements, recreation areas, parks, and other open spaces, reservations, manufactured homes spaces and building lines within the park. The information should be drawn accurately with detailed computations and field work completed. |
PREVIOUS